1- Asian Kingdom Machinery Co. Horizontal Dye Machine Model AK SL500 2 Tube 500Kg, 12/1998, Barco Sedo Sedomat 2000 w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motors

1 Thies 3 Port Ecosoft Dye Machine Split/Split (Natl Board #832), 1988, High Pressure

1 Thies 3 Port Ecosoft Dye Machine Split/Split (Natl Board #1626), 1990, High Pressure

1 Thies 2 Port Ecosoft Dye Machine Split/Split (Natl Board #1343), 1989, High Pressure

1 Thies 2 Port Ecosoft Dye Machine Split/Split (Natl Board #1344), 1989, High Pressure

1 Thies 3 Port Ecosoft Dye Machine Single Strand, 1983, Atmospheric

1 Thies 1 Port Ecosoft Dye Machine Split/Split (Natl Board #1153), 1989, High Pressure

1 Thies 3 Port Ecosoft Dye Machine Single Strand, 1979, Atmospheric

1 Thies 4 Port Ecosoft Dye Machine Single Strand, 1984, Atmospheric

1 Thies 4 Port Ecosoft Dye Machine Single Strand, 1980, Atmospheric

1 Thies 4 Port Ecosoft Dye Machine Single Strand, 1983, Atmospheric

1 Thies 4 Port Ecosoft Dye Machine Single Strand, 1980, Atmospheric

1 Thies 3 Port Ecosoft Dye Machine Split/Split,1992, Atmospheric

1 Thies 4 Port Ecosoft Dye Machine Single Strand, 1986, Atmospheric

1 Thies 4 Port Ecosoft Dye Machine Single Strand, 1983, Atmospheric

1 Thies 3 Port Ecosoft Dye Machine Single Strand (Natl Board #590), 1987, High Pressure

1 Thies 4 Port Ecosoft Dye Machine Single Strand, 1983, Atmospheric

1 Thies 4 Port Ecosoft Dye Machine Single Strand, 1983, Atmospheric

1 Thies 2 Port Ecosoft Dye Machine Split/Split, 1991, Atmospheric

1 Thies 2 Port Ecosoft Dye Machine Split/Split, 1991, Atmospheric

1 Thies 2 Port Ecosoft Dye Machine Split/Split, 1991, Atmospheric

1 Thies 3 Port Ecosoft Dye Machine Split/Split, 1992, Atmospheric

1 Albrecht 4 Section Conveyor Dryer 3 Pass 120” Wide Gas Fired, 1994

1 Tubetex 9-60 Tripad, 1992

1 Tubetex 9-60 Tripad, 1992

1 Tubetex 9-60 Tripad (No Folder) w/Dual Strand Detwister, 1992

1 Jemco Tubetex Continuous Rope Bleach Range w/ J Box Saturator, 7 tube bleaching section and 6 tube washer. 2001.

1 Bianco 4 roll open width pad 2200/2000.

1 Fabcon Tubular Pad Drying Line consisting of:
Fabcon Twin Ballon 4 roll extraction pas model 1038 to conveyor dryer 6 zone gas fired 48" wide 3 pass, dismantled never used
(new) single strand year 1999.

1 Fabcon 1060 4 Roll VH Pad w/ turntable, 1987.

1 Fabcon 1060 4 Roll VH Pad w/ turntable, 1992.

1 Gessner 96" 24 Roll Knitgoods Napper, 1988.

1 Fabcon Gullwing Open width Compactor, 1997.

1 Corino Slitter with pad, stainless steel, 1997

1- Scholl Dye Machine Model 89/65, 2 Port, 1200lbs.capacity SER# SJM-21, Year 1989, Acrosser Controls w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motors.

1- Scholl Dye Machine Model 89/66, 2 Port, 1200lbs.capacity SER# SJM-24, Year 1989, Acrosser Controls w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motorss

1- Scholl Dye Machine Model 88/65, 2 Port, 1200lbs.capacity SER# SJM-26, Year 1988, Acrosser Controls w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motorss

1- Scholl Dye Machine Model 89/64, 2 Port, 1200lbs.capacity SER# SJM-22, Year 1989, Acrosser Controls w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motors.

1- Scholl Dye Machine Model 89/67, 2 Port, 1200lbs.capacity SER# SJM-25, Year 1989, Acrosser Controls w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motors.

3- Young Il Machinery Co. Vertical Dye Machine Model Sky Type YISS-402 2 Port Split/Split 1765lbs., 11/1999, Han Bat DTC 7000 Controls w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motors.

1- Gaston County Sample Dye Machine SER# 720618 NB# 8579, Gaston County Microprocessor control, w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motors. Year 1972

3- Thies Dye Machine Model Eco Soft 2 Port, Microprocessor control, w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motors. Year 1988

2- Thies Dye Machine Model Eco Soft 3 Port, Microprocessor control, w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motors. Year 1988

1- Aztec Heat Pad Dye Range Model 86-827 Year 1986 consisting of:
Greenville Steel Pad, Aztec Infer Red Dryer, Thermosol Oven, (2) Two Stacks 72” Dry Cans 10 can each stack to Menzel A Frame Batcher.

1- Asian Kingdom Sample Dye Machine Model AK-L100 Han Bat PC1001 Microprocessor control, w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, all Pumps and motors. Year 1994

1- Gaston County Dye Machine 6 Port SER# 720541 NB#8471 Microprocessor control, w/Add Tank with Mixer, Heat Exchanger, Loading & Unloading Reel, Operator Platform, all Pumps and motors. Year 1972

1- Morrison Wash & Desize Range 80” Wide consisting of:
Entry System w/ guider to 5 Ton Morrison Nip Pad 80” Wide to Mod II Incline Washer 80’ Wide to 5 Ton Morrison Nip Pad 80” to Mod II Incline Washer 80” Wide to 10 Ton Morrison Nip Pad to 80” Single Lace Washer to 5 Ton Brugman Nip Pad 72” to Enclosed Saturator 72” to 40 Yard Steam w/30 Yard Heater 5 Ton Brugman Nip Pad 72” to Mod II Incline Washer 72” Wide to 5 Ton Brugman Nip Pad to 72” to Mod II Incline Washer 72” Wide 5 Ton Brugman Nip Pad 72” to Single Lace Saturator Tank 72” to Mod II Incline Washer 72” to Menzel A Frame Winder. Year 1984

1- Gaston County Futura Jet Dye Machine, Two Tubes, 24 feet overall tube length (no extensions), S/N AD830437, AD830434. NB#16679 and16678, Year 1983. New "ICES" Stand-alone Controller.

1-Gaston County Futura Jet Dye Machine, Four Tubes, 24 feet overall tube length (no extensions), S/N AD840013, AD840012, AD840014, AD840015. NB#16697, 16696,16698, and 16699. Year 1984. New "ICES" Stand-alone Controller.

1- MCS Beam Dye Machine, Model AT14-HT, S/N 02639, Year 1999, 58 psi at 306 degrees. F., National Board No. 643, CRN-D2605.6, 64" diameter kier, will take up to 80" wide dye beam. Motor - S/N 9938/0001H, Type K11R225 M4 HW, 575 volts, 56 amp, 1770 rpm, 60 HZ, 60PA/KW Pump - Type MB 150/32AN T.M. - R5044, Matr. 99029-0285L36Heat Exchanger - National Board No. 644, S/N 3655, Year 1999, maximum allowable working pressure shell side - 138 psi at 360 degrees F., minimum design metal temperature tube side - 20 degrees F. at 87 psi Dye Add Tank - 43" high x 33" diameter spray ring, 3 legs, 2 ¼" drain (9) Dye Beams, 83¼ " wide x 23½" diameter, widest perforation is around 67" (2) Carriages for the beam dye machine and the rest are on beam trucks

2- Asisa dye jig, year 1987, totally enclosed, 78” face 1600 mm dia., hydraulic motor for A-frame winder, 15 HP motor for hydraulic pump, 480 volts, 60 Hz

1- Braun Martint TSL atmospheric dye machine, 600 lb, standard equipment, center shaft injection, 2 pocket “D” configuration, pneumatic dry salt system, special voltage 575. S/N NTDT60094873DT

1-Gaston County 2 port jet dye machine, Model 824-2-1H, year 1994, vessel max. allowed working pressure 53 PSI @ 300 degrees F., machine No. three, National Board No. 24230, Serial No. G930884, 8' kies, single strand, 2-strand piece dyeing machine, 800 pound capacity, 400 pounds per strand, complete with pump, motor, high capacity heat exchanger, lint filter H-1, machine includes:
A) MP6000 controller, T-304 SS enclosure
B) DSO add tank -100 gallon
C) Walkway assembly-aluminum with fiberglass control
D) Low level wash
E) 3" quick change Ventura
F) Water volume control, motion detection
G) Combination motor control panel, T-304 SS enclosure
H) Programmable reel speed & pump speed
I) Eaton Model AF5000 variable torque drive 480 volt, 3 phase, 60 cycle, 25 HP, Nema 12 enclosure
J) Isolation transformer for 25 HP inverter Nema

1- KWG Paddle dyeing machine, 1000 lb, capacity, enclosed with pneumatic door, 3 HP motor and gearbox, 208-230/460 volts, 110" wide x 112" fr/bk x 64" deep

1- Scholl single port, 2-strand atmospheric jet dye machine (800 lb cap.) mach.# 97518 (man. ser.# SF-325), year 1997, Barco Sedomat 2000 automatic controls, pump, motor, heat exchanger, lint filter, 30 gallon stainless steel dye add tank, doffing reel, stainless steel platform

1- Scholl single port 3-strand atmospheric jet dye machine (1100 lb. cap.), mach.# 94528 (Man. Ser.# SF-238), year 1995, Barco Sedomat 2000 automatic controls, pump, motor, heat exchanger, lint filter, 30 gallon dye add tank, doffing reel, stainless steel platform

1- Sclavos 3-port atmospheric jet (900 lb. cap.) year 1994, S/N 320, single strand Barco Sedomat 2000 control, pump, motor, heat exchanger, lint filter, 50 gallon dye add tank, doffing reel, stainless steel platform

1-Volleinweider Shear Year 1995 74” Wide, Metal Detector, Model TSD-IT, SER#13278

1- Bianco Slitter 2400/2200 Stainless Steel Turntable to Rope Squeezer to Detwister w/ positive motorization to V Bar to E & L Optical Eye to Combi Guider to 2 Roll Pad R/R to Dribble Plaitor SER# LT1391/96 Year 1996

2- Corino CMP 40-20 Guiders Version “X” 2600/2400 NEW

1- Corino COMBI Guider Version “X” 2400/2200 NEW

1- Corino COMBI Guider Version “N” 2600/2400 NEW

1- Corino Scroll Roller Version “X” Profile “T” For Woven & Knits 2400/2200 NEW

1- Corino CMP 20-D Guider Version “X” 2600/2400 NEW

1- Corino LT03-Air Slitting Head NEW

1- Tandematic 160” Wide Infeed Guider

1- Hyup Sung 96” Knitgoods Shear SER# 08811 Year 1996

1- Gessner Napper 24 Roll SER# NLAC 108 w/ Turning Bars Year 1999

1- 72” Korean Inpection Frame w/ Edge Guiding

1- 80” Korean Inpection Frame w/ Edge Guiding

1- Kyung Won Machine Co. 3 Roll Calendar 1800mm Wide, 50 Ton, Paper/ Steel/Paper, Model KW-C3B (P.S.P), Year 2000

1- Kingsley Loop Dryer Model LD-3F-1G-80-240 SER#K-7-72-358 w/ 78” 2 Roll Pad in Entry, Gas Fired, 2 Roll Batcher

1- Alea Conveyor Dryer Model CA-85.20.6, 79” Fabric Width, Single Pass, 6 Zone, Gas Fired, Exit Plaiter Year 1987

1- Bruckner Tenter Frame Model Model 73183 Consisting of: Tension Entry to Guider to Vacuum Extractor to 2 Roll Pad to Operator Platform to Bruckner Frame 8 Bay, 1800mm Working Width, Horizontal Pin/Clip Chain, Knit Entry, 3 Finger Uncurlers, Overfeed, Pinning Brushes, Rail Guiders, 10 Ft. Entry, 8 Zones, 80 Ft. Housing, Gas Fired, 3 Ft. Cooling Zone, 2 Roll Batcher in Exit. Year 1983

2- Ellis 60” Hydraulic Extractors

1- David Gessner Heat Transfer Printing Machine, 1982, S/N RPS425, 80” Wide. 60 inch diameter Hot Oil heated Roll. Electric heated Thermal Oil by Y-M. S/N 1008. Entry from roll or box, has two-roll edge guider, two K10 plate guiders/uncurlers, transfer paper enters from three roll magazine roll holder. Has inline inspection station with Trumeter, delivery to plaiter.

1- David Gessner Napper, S/N-NH455, 24 Rolls, 80" wide, double or singleaction, now has rolls covered with sand paper- was being used as a sander.

1- Parks and Woolson "Tiger", S/N 11472, Year 1980, 72" wide, two brush brushing unit.

1- Parks and Woolson Polisher, S/N 11473, 80", Electric heated Roll.

1- John Verduin Calendar, Year 1989, 80" wide, Electronic controls, Variable friction up to 400%. 80 tons pressure, S/N 987D330. Three rolls- metal/fill/metal.

1- Stork RD4 HD 72" Rotary Screen Print Machine. Twelve color bed, running ten colors. Entry from rolls. ½ Ton Budget Electric Hoist, E&L Entry Scray, E&L Centering Spreader Guider, Print Machine, DD2 Air Flow Dryer. Exit to Plaiter.

1- Relaxed Dryer by LK & LH Company, Ltd. - Taiwan. 92” wide, 97” wide roll face. Year 1992- Type CD 323 OUNG. Three pass, Three zones, Gas heated. Has double tubular entry, plaiter at exit. Disassembled in warehouse.

1- Marshall and Williams, 72" Wide, Early Eighties. Vertical Return Pin Chain Tenter, Electric Heated One Zone Oven. Portable roll take-off for 8" tubes, Six foot entry field, 12 foot oven, 10 foot enclosed exit field, Upgraded to computerized controls with A/C drives.

1- #4 Marshall and Williams, 72" wide, Early Eighties. Vertical Return Pin Chain Tenter, Electric Heated One Zone Oven. Portable roll take-off for 8" tubes, Six foot entry field, 12 foot oven, 2 foot exit field, D/C drives. "Big Joe" Lift for transporting rolls.

11- A-Frames Heavy Duty, 80" wide x 16" diameter, with extended spline for the Menzel, 52" from floor to center, 48" wide at base, (2) sets of double wheels, 10" x 9 1/2" diameter

7- T-Frame 80" wide x 53" from floor to center, 10" barrel, male adaptor, 48" wide at the base, (4) wheels 9" diameter, with handles for pulling.

1- Asisa A-Frame Beaming Machine, 78" wide, Type EFB, S/N 2894, Year 11/85, with Earhardt & Leimer Guiders, Type KF1020R, (11" long rolls), 97" wide bridge, with 83" wide poly band expander, hydraulic drive, 88" face Menzel surface roller (12'2" high x 9'3" wide)

1- A-Frame Winder/Menzel Portable Hydraulic Power Units, Type STB, S/N 02459 or 02458, built in 1996, 7.5 HP motors, 208-230/460 volt, with female adaptors

1- A-Frame Winder/Menzel Portable Hydraulic Power Units, Type STB, S/N 02459 or 02458, built in 1996, 7.5 HP motors, 208-230/460 volt, with female adaptors

1- Menzel A-Frame Rewinder, type-SPB, S/N 01153, year 3/85. Motor-Model SBFC, S/N 0584, 3 HP, 1730 rpm, 230/460 Volts, 94/4.7 amps, 3 phase, 60 Hz. Pump-Variable volume pump, S/N 35859, Model PVV-06-10A2.

1- A-Frame Hydraulic Unwinder, hydraulic pump, disconnect superchuckPump motor - S/N D100LBH D7467053.0 kw , 6.5 amp , 1420 rpm, 415 Volts , 50 hz, 3 Phase Superchuck w/Drive Model B, S/N B95081 Superchuck NO Drive Model B, S/N B95169

1- Cooper 3-roll semi-automatic Batcher, saw tooth cut, 86" face rolls x 11" dia., NO motor, saw tooth blade

1- Parkinson 3-roll Batcher, #84-706, 101" wide, two (2) rolls (wrapped) are 11" diameter, third roll 6" diameter, wood slatted expander roll and rubber bow roll, transfer, auto doff, serrated blade, 48" diameter roll, 3 HP DC motor with pulley, gear reducer separate

1- Parkinson 3-roll Batcher, #84-006, 110" wide, steel rows (Knurled) 10" diameter, will make 36" diameter roll, transfer, auto doff, serrated blade, 4.5 HP D/C motor with gear reducer chain and sprocket

1- Web Tech Batcher, serrated blade, 3-rolls, 80" x 10" dia. rolls, 5 HP, 230/460 volts, Serial No. 6179

1- Asten (Print Dryer) Belt, 71" wide x 120' 6" long, Fabric Style T457, seam coil, joining wire, 117 KOL KT 200"

1- Asten Dryer Belt, 78-3/4" wide x 94.7" long, Thermesh, seam coil

1- Asten Johnson #3 SP Dryer Belt, 70" wide x 187' 6" long, seam coil, joining wire, 117 KOL KT 200" Fabric Style, Thermesh T1335A

1- Darex Screen Print Blanket Belt, Type PW5P138C5, Size 27 yds. + 32" long x 80-3/4" wide

1- Belt for Zimmer Dryer, 78-3/4" w X 155' 5-1/2" l (Made from fiberglass)

1- Habasit Belt (Print Blanket), 81.25" (2064mm) wide, 43' 5" (13.259m) long, (L1) Vorber Felxproof

1- Habasit Belt (Print Blanket), 86.81" (2205mm) wide x 109.74' (33450mm) long, Model ENU-50A (TPU Smooth Black print surface with 2 polyester fabric layers and 1 Aramid layer)

1- Tensor Belt (Print Blanket), 74.47" (1892 mm)wide x 87' 52" (26683mm) long, 2.6mm thick

1- Tubetex Dryer Belt, 70" wide x 21' long

1- Habasit Blanket type EAV-12EL belt, width 3,467mm (136.5"), 15,600mm (51.18') lenght, (8 color print machine)

1- Habasit Blanket Type EAV-12EL belt, width 2426mm (95.5"), lenght 21,235mm (69.67') , Mode of execution (L1) Vorber Flexproof

1- Crompton & Knowles (C&K) Brush machine, 72" roll face, 3-roll, Model No. BM72, Serial No. 8080, Year 1974 Blower, Cincinnati Fan, Model No. ORB-15, Serial No. 865568

1- Menzel Brush machine, type 126 BR, S/N 01046, year 5/81, 4-roll, brushes (need repair), collection system, Chicago blower # 184182, 15 HP motor and pump

1- Menzel Brush Machine, type 78 BR, S/N 01091, year 1984, 4 brush roll, roll size 80"

1- Menzel Brush Machine, Type 80 BR, No. 01240, year 9/98, 4-roll, 80" rolls, blower, 10 HP, 230/460 volts, 1745 RPM, Filter box

1- BF Perkins 3-roll calendar, S/N H-2602-74, 110" face, 120 Ton hydraulic, control panel, top roll filled, 110" wide x 27" dia., middle roll steel (polished), 111" wide x 18" dia., heated by steam or gas, bottom roll filled, 110" wide x 27" dia.

• A) 1-Spare filled roll, 110" face, 149" overall, 27" dia.
  B)-Spare steel roll, 111" face, 146" overall, 18" dia.
  C ) Motor Model No. 410-345-6002, Type COG4B, 230/460 volts, 3 phase, 60 HZ, 50 HP, 1775 RPM, 126/.63 amps
  D ) Louis-Allis gear box, S/N 1X20197, gear frame # 7255 YSL, 50 HP, 1695 RPM, gear ratio 20.9
  E ) BF Perkins hydraulic unit, S/N 2602, 15 gallon capacity, Racine pump S/N H74-2472A-1, Model B2581, 3 phase, 60 HZ, 5 HP, 1800 RPM, 230/460 volts, 14.2/7.1 amps
  F ) Lubrication pump, Model 125, Job No. 569, 3 phase, 60 HZ, 480 volts
  G ) Menzel Hydraulic compensator, type 110 SPB, S/N 18500, year 7/76, 108" wide

1- Butterworth two roll calender, Serial No. M12541, top roll steel 91" wide x 12" dia. steam heated, bottom roll - 89" wide x 20" dia. (filled) hydraulic 60 Ton, with consol. steam can & cooling can mounted on frame work, 10HP vari-drive A/C motor, 230/460 volts, 3 phase, 60 HZ, let off stand & take-up stand with electric clutch, one (1) spare new filled roll, 90" wide x 22" dia.

1- Verduin 80" 3-roll calender (Hot calender)
A) Center bar let off
B) Tension bar
C) Top roll & bottom roll steel, chrome plated, steam heated, 81" wide x 16" diameter
D) Middle roll filled, 79-3/4" wide x 20" diameter
E) C flange construction
F) Chilled roll, 80" x 14" diameter
G) 84" wooden slat expander roll
H) Center bar takeup with air clutch
I) 40HP Reeves vari-speed drive with 10HP hydraulic pump motor
J) Spare filled roll

1- Verduin combination Friction & Rolling calender, year 1989 consisting of:
A) 1- Erhardt & Leimer metal detector
B) 1- Operators platform
C) 1- Verduin calender, S/N 390D1072, 80 ton, top roll is 67” wide, bottom roll is 67” wide, chrome plated, 16” diameter, gas heated, (top and bottom rolls can be gas heated, bottom roll is cold), center roll is 66” wide, paper, 20” diameter, top and bottom rolls are driven each with independent 50 HP reliance D.C. motors, center roll is driven with a hydraulic motor, therefore, being able to run as rolling or friction calendar
D) 1- Extra roll, 66” face, 6-1/4” journal on one side (11-5/8” overall), 4-7/8” on the other side (10-1/4” overall)

1- MFG-Intra Calender Line, year 1996, S/N 96016 consisting of:

ENTRANCE
A) Fabric roll storage table (10’ 7” long x 7” wide)
B) 2- Port - A-Frame let off, single roll, Model OHFCU, 84” wide
C) Skying device (Web Adjustment) Model 3RG-DHF, 84” wide
D) Tension device, Model PD, 12” diameter x 84” wide drive rolls, 5” diameter x 84” wide guide rolls
E) Accumulator with 7 top and 7 bottom rolls Model Accumu, 60 yd capacity, chain type, raise and lower
F) Tension device, Model PD, 12” diameter x 84” wide drive rolls, 5” diameter x 84” wide guide rolls
G) Perkins 3-roll calendar, 72” face, hot oil. Top and bottom rolls are steel (16” dia.) chrome plated, Center roll (22” dia.) wool/cotton blend. Off nip drive, EZEE out roll lifting drives. Reeves variable speed drive, MGM 1982 (rebuilt 1995) hydraulic system for pressure, Lube oil system, seam jumper

EXIT
H) Tension device / pull roll with 12” diameter drive roll, 4” diameter guide rolls Model OHFLB, including diagraph inkjet print heads for product and lot data
I) In-line inspection stand 80” wide
J) Accumulator with 7 top and 7 bottom rolls Model Accumu, 60 yd capacity, chain type, raise and lower
K) Skying device
L) Set of centering guiders, with either 2-roll wind up Model OHF2RW with pneumatic hold down dancer arm Model AFW or an “A” frame surface winder with center wind attachment for both centering and surfacing
M) BF Perkins hot oil system – Model 180-2, S/N H90832-96

1- Vertical Laquer coating machine, made by Johannes Zimmer, Type RSL-87, S/N 06164, year 1991, 158" long

1- Vertical Laquer coating machine, made by Robustelli, manufactured in Italy, Year 1994, 188" long

1- Fab-Con compactor for tubular knitted fabric, type Gullwing Stablesizer with metal detector, ww 1270 mm, year 1992, Precision folder, S/N 92225. Motor Dynamatic Model AS1805040002, S/N 69164 028 0004, 240/1335 RPM, 90 Volts DC, 5 HP,3 phase, 220/230 Volts AC, 50 Hz. Extra included: 1-Set new calander rolls, 1-New knife

1- Tubetex Wide Open Width Compactor, 84” wide for 80” fabric, Machine #101-S, with Tandematic guiders in the entry, at exit is a 2-roll Tubetex batcher with manual cut, hot oil heated with a Sterlco heater, Steal Tronic, Model 16026BX, S/N 43824, 230 volts, 3 phase, 60 cycle, Watt 1 Htr 36 KW per heater, Wire Diagram #C682-05184

1- Menzel Cradle, type 80 US, No. 02312, year 8.97, 4-rolls, 80" wide x 8" dia. hydraulic unit, Serial No. AL10-502, 1 HP, 9 GPM, 175 PSI, RES. CAP. 10

1- Goring Kerr metal detector, 67" wide, with controller, STK. No. C-4832

27- Dry Can / 80" wide x 23" diameter, with journals, bearings & bearing housing, V belt pulleys, all are 1-1/4" diameter hold but can use reducer range from 75 to 130 PSI. Drive Side Shaft size 6-1/2 to 11" x 2-3/6" dia. Shaft size 2" to 5-1/2 x 2-3/16" dia.

• (25) Dry cans have tappered or rounded ends, 80" face, 23" diameter (loose cans)
  (1) At 90 PSI teflon coated
  (6) At 130 PSI teflon coated (2 missing v-pulleys)
  (12) At 75 PSI teflon coated (2 missing V-pulleys)
  (5) At 75 PSI non teflon coated
  (1) With no ID Tag is teflon coated
  (2) Dry cans have flat ends, 80" face, 23" diameter.
  Both At 75 PSI teflon coated
  * Note: All cans have dents, scratches, or teflon needs recoating

2- American Dryer Corp. steam dryer, stainless steel basket, 42"x 42" size opening, 208 volts, 60 HZ, 3 phase, Model ADS120ES
1- Rome machine & Foundry Co., extractor S/N 930302U, nominal working capacity 700 rpm max. approx. 32" depth x 60" diameter. Hydraulic unit- Rome machine & Foundry Co., S/N 930303. With two sets of split baskets. Motor- 30 HP, 1755 rpm, 575 Volts, 60 Hz, 29.6 amps, 3 phase.

1- Rousselet extractor - Rapide 150, type SCPC-120TE, S/N 150284, year 1977, max. load 100 kg, 47" dia. x 19" depth. motor- 40 HP, 575 Volts, 1760 rpm, 19 amps, 60 Hz, 3 phase. With heat exchanger and control panel

1- Texacote Foamer, Model AJ, S/N 472. Motor – 7.5 HP, 575 Volts, 1165 rpm, 8.7 amps, 3 phase, 60 Hz

1- Gessner Blend-Matic roll grinder, S/N GR44, 160" bed, 133" trav., 120" rolls. For in-house reconditioning of napper rolls. Unit will grind two rolls simultaneously. The front roll has its wire tips ground by rotating abrasive discs, rear roll is face ground

1- Bianco Compact M Centering device, 78" wide, with two driven scroll rolls, with electric eye and swing rolls

1- Bianco machine, type Compact 90, S/N 940009, Year 1993. Two 90” wide x 5” diameter scroll rolls, 460 volts, 60 Hz (Driven). Sensor and control

1- Tandematic Guiding System, 96" wide, Tandematic uses scroll rolls to spread fabric and give full width support while fabric is in relaxed condition. A novel split roll system controls nominal lateral shifts. A row of soft brushes touches the fabric at first scroll roll when major corrections are needed. 230/460 V, 5.5/2.75 amp, 1730 rpm, 60 Hz, 3 phase

1- Set of Erhardt-Leimer guiders, type KF-1064, left & right, 11" rolls, mounted on bridge, 109" overall, 74" working width
1- Set of Erhardt-Leimer uncurlers, 3-roller, 15", No. 290506-36/ No. 290506-58, 560 volts, bridge 115" overall, 72" working width , with electric control box

1- Set of Toyo – T.K. pneumatic cloth guiders with bridge, Right: Model PN 10, S/N 12578, 10” rolls, Left: Model PN 10, S/N 12591, 10” rolls. Bridge: 120” long, 84” working width

1- Set of Toyo Machinery Company guiders, 12" rolls, Right Hand S/N 14147 Model PN-12, Left Hand S/N 14147 Model PN-12, bridge 11' 3" long

1- Zimmer Strike off table sample print machine, year 1992, Model 91.0939 S/N PM246, 84" wide print belt, 1850 mm print width, 24'6" long, 2 color positions, belt is continuous, heads are stationary, belt washer, Glenro integrated energy heater mounted on top of the machine, 44" F.B. Voltage 480/3/60, speed 25 m/min

1- J. Zimmer rotary screen print machine, 12 color, Model RSD 346, year 1985, print width 1850mm, (72/73 inches). Machine is 31 feet long. Presently operating with eight screen holders and one or two incomplete screen holders. There are at least 8 combination color tubes and squeegee holders and 8 sets of 64 mm screen holders (Model 850-550 RSD)

1- Gessner Saber shear, S/N SA322, 144” wide roll, 144” knife, 230 Volts, 3 phase, 60 cycle. CEIA metal detector, S/N 94115, 220V/3/60

1- Menzel singer, 8 burner, 78” wide, 8 chilled rolls 78” x 5” dia., hood, gas train and controls

1- Vollenweider singer, 2-burner (ceramic burners) 86” wide, year 1989

1- In -Line inspection machine which includes the following:
A) 1 - Compensator
B) 1 - Back light and overhead light, 80” wide
C) 1 - Operators platform
D) 1 - Set of scroll rolls to keep the fabric open
E) 1 - Center guiding light
F) 1 - Inspection board
G) A-Frame, Center and surface winder
H) All motors and controls 1- Pernick inspection machine, with Aframe unwind, optical eye for loop control, overhead light, 80” wide board with lighted back, operator’s platform.

1- Fischbien railway sewing machine, 72”, 2-roll surface winder with edge guide control, has a DC variable speed drive with forward and reverse, digital yardage counters

1- Pernick inspection frame, 96”, Model TM1100A, S/N 9603, from truck over lighted board, 2 roll surface wind up with edge guide, WS drive

1- TMI Inspection machine, S/N 872428A, 72” fabric width, fabric comes from a wooden shell or bar letoff over a yardage clock, Trimar electric hydraulic edge guide control, takes up onto a package of around 15”. Can cut seconds out and take up onto a square bar or cloth shell. Has variable speed drive.

1- TMI inspection tubers 81” face width for 72” goods, center wind let-off and take-up with second take-up, forward/reverse, hydraulic guiding, speed control, S/N 88239B, 88249A, 89116, 90124

6- Lightnin mixers-electric

1- Strandberg Moisture Monitor, Model M-200

1- Fabcon extraction pad, consisting of: unloader, entry, Fabcon pad and exit to a box plaitor.
Fabcon pad S/N 898, 54” wide, single strand, steam box, (2) bottom rubber rolls and (1) top rubber roll, all rolls are 54” x 10” diameter

1- Greenville steel pad. Two rubber rolls 86” width x 16” diameter, single dip pan, driven scroll roll 10 ton pneumatic, chain & sprocket drive, 15 HP D/C with gear reducer

1- Tubetex “Dyrol” dye pad for tubular knits, 51” face, S/N 112-S, (2) 10” dia. rubber covered nip rolls. Pad is driven by a 5 HP DC motor. Adjustable width ring guiders installed at entry to squeeze rolls. Cloth entry assembly provided. Horizontal type folder installed on exit side of pad. All electrical & pneumatic controls are provided. *Machine rebuilt

2- Babcock padders 1993 yr, 2 meters wide (78”), off set rubber rolls 12” diameter, pneumatic pressure, 5 ton, with bow roll, scroll roll, single dip, low liquor ratio pan, adjustable up & down (pneumatic)

2- Babcock padders, 1992 yr., 2 meters wide (78”), off set rubber rolls 12” diameter, pneumatic pressure, 5 ton, with bow roll, scroll roll, single dip, low liquor ratio pan, adjustable up & down (pneumatic)

1- Morrison Sanforizer, early 1980’s, consisting of:
A) 1 - Cloth entry, 84” wide
B) 1 - Set of cloth guiders
C) 1 - Morrison cole spray, 80” wide
D) 1 - Mt. Hope mechanical weft straightener, 82” wide
E) 1 - Morrison pup tenter, 80” wide
F) 1 - Morrison rubber belt section, s/n 84381, 84” wide x 20” dia., rubber belt is 76” wide x 2” thick.
G) 1 - Morrison palmer, S/N 38114, 1st drum is 80” wide x 100 dia., 2nd drum is 80” wide x 68” dia. blanket is 79-1/2” wide
H) 1 - Plaitor
I) 1 - DC drive

1- Tenter Frame / D.R. Kenyon / 210” wide, gas fired, 1998

1-D.R. Kenyon 1998 Direct Gas Fired Tenter Frame, consisting of:
A) 13’ A-Frame Unwind (surface)
B) Lint Removal System, 120” wide, (2) vacuum slots (1 on top and 1 on bottom), with a 75 HP Nash liquid ring pump
C) Set of Driven Scroll Rolls, which are 120” wide
D) 2-Roll Werner Pad, rubber/stainless roll, 120” wide x 16” diameter, approx. 5 ton pressure
E) Vacuum Slot, 120” wide, Evac vacuum with 40 – 50 HP pump and motor with lint separator and chemical reclaim

1- EVAC vacuum pump, Model D-125/20, S/N 120, Type-P.D. wet vacuum pump, vacuum service 1N HG-15, 1270 rpm, 400 ACFM, 20 BHP GPM, Sealing liquid-2.5, Motor 20 HP, 575 volts, 20 AMP, 1750 rpm, 60 hz, 3 phase Vacuum slot 77”, 114” overall, silencer and filter tank

1-EVAC vacuum pump, MD Pneumatics, Model H462-5518, S/N-1161H84, motor 25 HP, 575 volts, 26.4 amp, 1180 rpm, 60 hz, 3 phase. Vacuum slot 77”, 109” overall, mounted on stand, silencer, filter tank, control panel

1- EVAC Vacuum system - Job No. 88-047, Model No. LRN50575 Nash, Vacuum pump - size L1001, Test No. 8701334, Motor - S/N 388C, 50 H.P., 460 Volts, 1760 rpm, 65 amp, 60 Hz. Recirculation pump - Model No. 1-1/2 AOD-CNNN, S/N 798667 with tank, filter tank, vacuum slot, 72 working width, 116” overall, on stand, control panel, (finish recovery)
1- Barrel Washer, NO serial number, Motor -230/460 volts, 7.5 H.P., 60 hz, 1750 rpm, 3 phase, washes two barrels at once, stainless steel enclosure.

1- Murata air jet spinning frame, year 1997, Model 802H, 72 spindles/frame, both Z and S twist, drafting system 4-roll, double apron with pendulum arm, cylindrical take-up onto a 6” tube, auto knotter, dustbox, intelligence analyzer, informator system, auto doff, touch key control, full package conveyor (Manually change gear ratio w/touch pad control); H-3 nozzles
(1) S/N 96X373110-1, (1) S/N 96X373110-2, (1) S/N 96X373110-4, (1) S/N 96X373110-5

1- ICBT Model FT15E2HT/AD X2 Texturizing Machine. 192 spindles, 96 take ups, 8 sections w/ 24 spindles per section. Friction twist spindles. Take up speed 1500 m/min maximum. Double deck take up. Double density spindle vs. take up configuration. Capable of operating independently per side as two machines of 96 spindles w/ 48 take ups. Yarn range 30 to 150 denier with specific range limited by friction disk type and heater ceramic sleeve length. Pneumatic threading assist. High temperature Helicoil Heater System with range to 800 deg. C. Heater operates as closed unit but opens for thread up. Designed to process (2) yarn ends per heater unit. Special Vortex type fume removal. 1234 mm individual yarn contact cooling and stabilization plate. ICBT motorized self threading (operator assisted) spindles. Individual position automatic doffing system. Computer controls doff cycle with input of either package weight, yarn length, or desired doffing time by position. 10” traverse, 12” max. package dia. 22 lb. package. Electronic ribbon breaking. Yarn oiling system. Low profile anti vibration construction. Year 1998, S/N 96441.14
Dimensions: 58’ L X 27’ W X 8’2” H

1- ICBT Model FT15E2HT/AD X2 Texturizing Machine- 216 spindles, 216 take ups, 12 sections w/16 spindles per section. Friction twist spindles. Take up speed 1500 m/min maximum. Double deck take up. Double density spindle vs. take up configuration. Capable of operating independently per side as two machines of 108 spindles with 54 take ups. Yarn range 30 to 150 denier with specific range limited by friction disk type and heater ceramic sleeve length. Pneumatic threading assist. High temperature Helicoil Heater System with range to 800 deg. C. Heater operates as closed unit but opens for thread up. Designed to process (2) yarn ends per heater unit. Special Vortex type fume removal. 1234 mm individual yarn contact cooling and stabilization plate. ICBT motorized self threading (operator assisted) spindles. Individual position automatic doffing system. Computer controls doff cycle with input of either package weight, yarn length, or desired doffing time by position. 10” traverse, 12” max. package dia. 22 lb. package. Electronic ribbon breaking. Yarn oiling system. Low profile anti vibration construction. Qualitex Yarn monitoring system. Year 1998. S/N 96441.15
Dimensions: 69-1/2’ L X 28’ W X 8’ 2” H

1- Two for one twister, year early 1980’s, manufactured by Ratti SPA, Italy
Model R522-DT, 144 spindles, 220 mm pot diameter, supply package textured or flat yarn, up to 220 mm diameter by 250 mm height, denier range 30 to 600, twist range TPM 96 to 3,980 spindle speed up to 12,000 RPM, individual spindle brakes, adjustable balloon control guides, end break detector, overfeed to take up, take up tube length 230 mm, traverse length of take up 200 mm, take up package up to 250 mm diameter. Motor two speed, 30 HP (22 KW). Electrical 460/380/3/60/50

1- Titan tying-in machine with 87” wide stand, # K-2000, # 7133

2-Young Il Machinery Co. Horizontal Dye Machine Model Sky Type YICT-16 Laboratory Dye Machines SER# 96-63 10/1996, SER#97-11 11/1997

1- Precision Scientific galvanic cell oxygen analyzer, S/N 12AD-6

1- Orbeco-Hellige pocket comparator Model No. 605-AHT

3- Atlas electric crockmeter, A.A.T.C.C., Model CM-5, 120 Volts, 1.0 amp, 60Hz

1- Alfred Suter Co. sample cutter, type ECR-2

1- J.A. King sample cutter, Model 3090A, pneumatic operated, S/N 8040

1- Datacolor International Solution Maker AUTOLAB SM, 220 Volts, 60 OR 50 cycle, Model AUTOLAB SM, S/N 80159003, 80 lbs weight.(1) Datacolor International Mixer, 6 mixing stations
(1) Mettler Toledo scale, Model PR5002, Delta range

1- Gaston county lab dye machine, S/N 7390-710354, single kier, 7-1/2” diameter x 8” high, bolt lock kier, with Old Foxboro rate-of-rise controller, 24 P, 220/3/60

1- Ahiba Easydye, type Easydye, 230 Volt 1/N/PE, 2050 W, AC 50/60Hz, S/N 95205, temperature 140 degrees, S/S beekers, missing one cap on canister

1- Ahiba Easydye machine, Data Color, 230 Volts I/N/PE 2020 W, AC 50/60 Hz, SR3, FABR NR 96043, temperature 140 degrees, with 12 cups

1- American Laundry 25 lb capacity Extractor; Model MONEX; 11" x 17" basket; voltage: 220/440/3/60, 1740 RPM, 1 HP

1- Gaston County lab extractor with heater, Partlow control, single spindle, 10” dia. x 8” deep

3- Hasler- Bern speed indicators

3- Carolina Lab Knitter, 220 needles, 3-1/2” diameter D/C drive, NO plates

1- Lawson-Hemphill Lab Sample knitter, 3-1/2” diameter, 220 needles

1- Colorguard II Light Booth, Model CG7600, S/N 3067, 24” wide x 18” high x 20” deep, 115 Volt

1- ACS Inc. illuminance meter T-1, Model T-1, S/N 204289

1- Alnor temperature meter, Ranges 0-500 deg. Fahrenheit

3- Fisher Accumet PH meters

1- Hersey / Veeder Root water meter. Form No. 0789100 007, Tag 9801568

1- ACS Inc. Minolta illuminance meter T-1, Model T-1, S/N 205178

2- Chemineer Ing Mixer, Model PGA-2V, 30” shaft length, 0.25 HP, 500/125 RPM, 110 volts

1- Precision Scientific Electric lab oven, Model 14, S/N 11AA11, inside 9” x 9” x 12” high, 115 Volt, 500 w, 150 degree C.

1- Menzel lab pad, type 24-PA, S/N 01114, year 6/89, (2) 24” wide rubber rolls, 7” dia

1- Bendix Corporation psychron, Model No. 566

3- Alfred Suter Co. yield scale, type B

1- Atlas scorch tester, Model No. SO-3B,S/N ST966, 115 volts, 60 cycles, 1-amp

1- Keisokki Classifault II, with Chavis 1206 winder, 6 spindles, attachments, disc tensions, Classimat imperfection meters are mounted on each spindle, year 1993

1- Magnehelic air flow tester, max. 15 PSIG pressure

1- Scott tester, Model J, S/N 19841-692 with pneumatic clamps for fabric

1- Scott tester, Model DH, Tester No. 48123, with clamps for fabric, chart 300 lb.

1- Scott yarn tester, Model J, S/N S3439, 300 lb. Recorder

1- Tester / Statimat ME / Tester for yarns

Statimat ME with standard accessories & software (110 volts, 60 Hz power supply) w/100N & 1000N load cells, S/N 32796, year 1997, Part No. S-51

Automatic tensile tester for yarns, for assessing the force/elongation-properties of staple fiber spun yarns, filament yarns, twists, monofilaments (special version) or narrow taples (special version), according to the principle of constant rate of extension (CRE - DIN 53 834; ASTM D 76 and D 2256; ISO 2-62); also suitable for tensile tests with special clamps (optional) and manual mounting of the sample.
Standard accessories for Statimat ME:
Pneumatic yarn clamps
Package changer for 20 units
2 Load cells F 10N, Range 0-10N (1 kg); F 100N, Range 0-l00N (10 kg)
1 Foot switch
1 Bottle damping oil “R" 100 CCM
1 Set (4 pieces) clamp jaw faces
Extra package changer module for 10 units
Yarn feed device for high-speed yarn draw-off between tensile tests (nip roll feed system)
Pneumatic clamps for tensile tests of high-tenacity yarns, with integrated bolts manual fixing of yarn sample without or with wrapping 360 degrees around bolts
Autocount - Automatic determination of yarn count with integrated electronic precision balance and computer control. Measuring length can be set as requested, testing time approx. 30 sec. at 120 yd. measuring length. Requires the nip roll system and standard software

1- GGT-Gerber Garment Technology Inc., automatic cutting table 72" wide, Model S93-7, C100/C100A, W/O.# 01625, S/N 21152-2, year 1993, consisting of:

• A) (1) 10’ Conveyor Doffing Belt, 78” wide
  B) (1) Computer Control Panel – GGT, for cutting table 72" wide
  C) (1) Accumark 230-B Computer Aided Design System for pattern making, 386’s drive, S/N 3304590144, with 18” color monitor, keyboard and printer

1- M&R Challenger screen print machine for T-shirts, 10 stations, room for 2 more to make it 12 station, 10 color.

1- Birch Bros. Railway sewing machine, Frame S/N 2030, Merrow head style 70-D3B-2, S/N 255591, 72” fabric width

2- Fischbein sewing machine Model EH

1- Kemco Hot Water System 12,000,000 BTU Model TE-100 Complete with all tanks and 2 Water Softeners, 180 GPM Minimum

1- Effedue ADD/700/42 Lint Collection System w/Airtech Handler, 125HP Motor, Year 1998

1- Dayton Air Compressor, Model No. 3Z968, 2-stage, CCW-ROT., 10 HP, 3-phase, 175 max. psig. Pump - Model No. 5F236B. Tank - National Board No. 33619, Year 1988, psi at 650 degrees F., #36020. Motor - 10 HP, 230/460 Volts, 24/12 amps, 1745 rpm, 1745, 60 hz, S/N 401045097, 3 phase

1- Gardner Denver Air Compressor, Model ECMQLC, 1780 rpm, Motor-type TDS, 3 phase, 60 hz, 75 hp, 1775 rpm, 200 Volt

1- Kaeser CS121 Air Compressor, Model CS121, S/N 1010, year 1999, 110 PSIG, 458 CFM, 60 Hz, 1800 rpm, 3 phase, 100 HP, 460 Volt, 125 FLA

1- Orizio Knitting Machine Model CMOAN 30” 18 cut 60 Feed 1680 Needles SER# N/A Year 1998 w/ Alandale side tube creel, lint fan, Lycra Ready, Memminger MPF 20 K1 feeders, Pulsonic oiler.

1- Orizio Knitting Machine Model CMOAN 30” 18 cut 60 Feed 1680 Needles SER# 1020912 Year 1996 w/ Alandale side tube creel, lint fan, Lycra Ready, Memminger MPF 20 K1 feeders, Pulsonic oiler.

1- Orizio Knitting Machine Model CMOAN 30” 18 cut 60 Feed 1680 Needles No Plate Year 1997 w/ Alandale side tube creel, lint fan, Lycra Ready, Memminger MPF 20 K1 feeders, Pulsonic oiler. Extra 14 cut dial & cylinder

1- Orizio Knitting Machine Model J4SCM 22” 22 cut 88 Feed 1500 Needles SER#1019461 Year1996 w/ Alandale side tube creel, lint fan, Memminger MPF 20 K1 feeders, Pulsonic oiler. Extra 20 cut dial & cylinder

1- Orizio Knitting Machine Model J4SCM 22” 22 cut 88 Feed 1500 Needles SER#1020154 Year1996 w/ Alandale side tube creel, lint fan, Memminger MPF 20 K1 feeders, Pulsonic oiler. Extra 20 cut cylinder Machine

1- Orizio Knitting Machine Model J4SCM 20” 22 cut 80 Feed 1380 Needles SER#1020077 Year1996 w/ Alandale side tube creel, lint fan, Memminger MPF 20 K1 feeders, Pulsonic oiler. Extra 20 cut cylinder Machine

1- Orizio Knitting Machine Model J4SCM 19” 21 cut 76 Feed 1320 Needles SER# N/A Year1996 w/ Alandale side tube creel, lint fan, Memminger MPF 20 K1 feeders, Pulsonic oiler.

1- Orizio Knitting Machine Model J4/CA 18” 22 cut 72 Feed 1248 Needles SER# 1022041 Year1998 w/ Alandale side tube creel, lint fan, Memminger MPF 20 K1 feeders, Pulsonic oiler. Extra 20 cut cylinder

1- Orizio Knitting Machine Model J4/CA 18” 20 cut 72 Feed 1140 Needles SER# 1020769 Year1998 w/ Alandale side tube creel, lint fan, Memminger MPF 20 K1 feeders, Pulsonic oiler. Extra 22 cut dial & cylinder

1- Orizio Knitting Machine Model J4/CA 20” 22 cut 80 Feed 1380 Needles SER#1022069 Year1998 w/ Alandale side tube creel, lint fan, Memminger MPF 20 K1 feeders, Pulsonic oiler. Extra 20 cut cylinder.

1- Orizio Knitting Machine Model J4/CA 20” 20 cut 80 Feed 1260 Needles SER#1021249 Year1998 w/ Alandale side tube creel, lint fan, Memminger MPF 20 K1 feeders, Pulsonic oiler. Extra 20 cut cylinder.

3- Jumberca knitting machines, Model DIB, 30” dia., 14 gauge, 60 feeders, 1320 x 1320 needles

2- Keum Yong circular knitting machines, year 2000, Model DM-1.5WV4T, 30" diameter cylinder, 7 gauge, 45 feeds, 660 needles on cylinder, 45 Memminger MPF-20-K2 feeders, Uniwave oiler
Standard accessories for each machine:
MPF positive feeding device (Germany), Uniwave lubrication (USA or Pulsonic), Lint-blower system, Samsung needle (Korea), Inverter (L.G.), Lycra system: MER-24 (Germany), Side creel, Standard spare parts and tools, H.P. 240 volts, Extra cam, Net door

5- Keum Yong circular knitting machines, Model KILM-72AH, 72F needles, no cylinder

2- Kuem Yong circular knitting machines, Model KILM-72AH, 2256 needles, 30 x 24 x 72

1- Kuem Yong circular knitting machine, Model KILM-72AH, 1680 needles, 30 x 18 x 72

1- Kuem Yong circular knitting machine, Model KILM-72AH, 1896 needles, 30 x 20 x 72

3- Kuem Yong circular knitting machines, Model KILM-84AV, 2256 needles, 30 x 24 x 80

1- Kuem Yong circular knitting machine, Model KRB-2TH(1TR), 1320 needles, 30 x 14 x 60

2- Kuem Yong circular knitting machines, Model KRB-2TI(2TR), 1320 needles, 30 x 14 x 60

2- Kuem Yong circular knitting machines, Model KRB-20H, 1320 needles, 30 x 14 x 60

1- Kuem Yong circular knitting machine, Model KM-4WH4T, 80F needles, no cylinder

1- Kuem Yong circular knitting machine, Model KM-4WH4T, 828 needles, 12 x 22 x 48

1- Kuem Yong circular knitting machine, Model KM-4WH4T, 870 needles, 14 x 20 x 56

1- Kuem Yong circular knitting machine, Model KM-4WH4T, 900 needles, 13 x 22 x 52

1- Kuem Yong circular knitting machine, Model KM-4WH4T, 960 needles, 14 x 22 x 56

2- Kuem Yong circular knitting machines, Model KM-4WH4T, 1008 needles, 16 x 20 x 64

1- Kuem Yong circular knitting machine, Model KM-4WH4T, 1068 needles, 17 x 20 x 68

1- Kuem Yong circular knitting machine, Model KM-4WH4T, 1080 needles, 16.5 x 21 x 64

1- Kuem Yong circular knitting machine, Model KM-4WH4T, 1008 needles, 14 x 22 x 56

5- Kuem Yong circular knitting machines, Model KM-4WH4T, 1128 needles, 18 x 20 x 72

3- Kuem Yong circular knitting machine, Model KM-4WH4T, 1224 needles, 18 x 22 x 72

1- Kuem Yong circular knitting machine, Model KM-4WH4T, 1248 needles, 18 x 20 x 72

1- Kuem Yong circular knitting machine, Model KM-4WH4T, 1248 needles, 20 x 20 x 60

8- Kuem Yong circular knitting machines, Model KM-4WH4T, 1248 needles, 20 x 20 x 80

2- Kuem Yong circular knitting machines, Model KM-4WH4T, 1344 needles, 20 x 21.5 x 80

11- Kuem Yong circular knitting machines, Model KM-4WH4T, 1380 needles, 20 x 22 x 80

1- Kuem Yong circular knitting machine, Model KCSJ-III, 1872 needles, 33 x 18 x 1872

1- Mayer & Cie knitting machine, Type OVJA1.6E, S/N 45555, 762 mm, 30 inch, 1.41 mm, 18E 2x1680 needles, year 1997 48 feeders, 48 Memminger tape feeds, oil mist lubrication, NO creel

1- Monarch rib knitting machine, year 1994, 15” diameter cylinder, 14 cut, 29 feed, Memminger positive feed accumulators, Model MPF 20 K1, digital readout, AC inverter control & motor 440 volt, oil mist spray, spreader, internal flutter blower, Uniwave top fan, normal spares, S/N 0548445

4- Knitting mach. / Ssang Yong / Jersey, 36” diameter
Ssang Yong Jersey single knit, 4 track, Model S.1.4, year 2000, 36" diameter cylinder, 10 gauge, 48 feeds, 48 Memminger MPF20-K1 feeders, 12 Memminger MER2 lycra attachments
Machine –complete - has 96 feeders, 12 Lycra feeders, 6 creels arms, creels
(1) Lot# 4946 S/N 0004103 - Complete
(1) Lot# 4948* S/N 0004102, (Incomplete – missing 4 lycra feeders
(1) Lot# 4960* S/N 0004100, (Incomplete – no lycra feeders)
(1) Lot# 4961 S/N 0004104 – Complete

1- Ssang Yong circular knitting machine, Jersey single knit, 4 track, Model S1.4, M/C No. 0001056, Date 2000.01, 220 Volts, Freq. 60 Hz, 3 phase, 36" diameter, 10 gauge, 48 feeds, 15 Lycra feeds, 142 feeders

2- Vanguard knitting machine, Model 1SR2, 30” dia., 14 cut, 42 gauge, 60 feeds, needles cylinder 906100-W2, dial 906101-W2

1- Vanguard Circular Knitting Machine, Model 1SR2S (Rib), S/N 41271, 9” diameter, 12 cut, 18 feeds, 36 gauge, Needles: Cyl 905681-W2, Dial 905682-W2

1- Vanguard Supreme Circular Knitting Machine, Model 1SR2/R, S/N 42585, 24” diameter, 11 Cut, 48 Feeds, 36 gauge, Needles: Cyl 905772-W1, NO creel

4- Vanguard Supreme 3 end Fleece knitting machine, Model 4SFT-2-26” dia., 31 feed, 18 cut, 1500 slots, UJ-G IRO tape feeds, Memminger tapes, Alandale fan, lubrication, 1997 year, NO creels